After getting the sub floor down on one part of the room we started working on the raised area of the room.
First we measured and cut the 2×4′s we would need, and then we pieced them together and added bracers through out.
Once the bits were all in place we attatched them together, using both screws and gorilla glue, then we anchored it all to the wall.
Once we were happy with the layout we threw in some insulation for noise buffer and started working on the plywood.
And there you go, one raised area in the rec room! *hahaha* 
Because we were putting down vinyl tile there, instead of laminate flooring, we painted on a layer of the primer made for increasing adhesion.
And then the vinyl tiles started getting applied..
We opted or black and brown. Aaron snuck in four white tiles, so we put them in the center for a pretty eye catching look.
Once the tile bits were all down we put the trim along the walls to hide the seams, and a flooring strip along the front before going back to putting in the sub-flooring.
